ULTIMA Anti-sway Wire System
Specifications (anti-sway)
|
Grip + end fitting (plate)
|
* Ultima grips are designed with a limited wire diameter for safety reasons, even though the external shape is the same.
* For improvement, the shape and specifications are subject to change without notice.
ULG-3012、3012 A | ULG-1509、1509 A | ULP-3002 | |
|
|
||
Wire | φ3.0 | φ1.5 | - |
Screw | M12 | W3/8 | - |
Allowable load | 1,670M (170kg) | 540N (55kg) | - |
Material | brass、steel | SUS | |
Finishing | unichrome palting | - | |
Note | with nut |
Hole diameter φ12 (common to φ3.0 and φ1.5) |
Wire
|
*Do not use any wire other than the special wire provided by the Company.
*Standard wire grip dimensions are L=1,000 and 2,000 mm. Please consult us for other dimensions.
hex terminal wire on one side | ball terminal wire on one side | fused wire on both sides | |
Wire length | L=1,000、L=2,000 | ||
Material |
Wire:SUS304 (7×7) |
||
Wire set | φ3.0 wire set A | φ1.5 wire set A |
φ3.0 wire set B、φ1.5 wire set B |
wire with M6 eyebolt | wire with W3/8 eyebolt | |
Wire length | L=1,000、L=2,000 | |
Material |
Wire:SUS304 (7×7)、M6 eyebolt、W3/8 eyebolt:steel、nickel plated |
|
Wire set | φ3.0 wire set C、φ1.5 wire set C |
φ3.0 wire set D、φ1.5 wire set D |
Note | with M6 eyebolt、nut |
with W3/8 eyebolt、nut |